Vermilion, Ohio celebrated Duct Tape with their annual Avon Heritage Duct Tape Festival.  The Duct Tape Festival, in its 7th year, ran June 18-20th, to celebrate the many uses of Duck brand duct tape and Avon’s claim to be the “Duct Tape Capital” of the world, the town that is home to Duct brand tape.  This past Saturday’s parade featured floats, vehicles, marchers and pets all decorated or made with colorful duct tape. The Duct Tape Festival site is www.avonducttapefestival.com

So one must know, how do you use Duct tape?

Tweet This Post

Over the past month or so we have talked about being ASME/ANSI compliant as far as pipe markers go. We’ve gone into detail about the compliance requirements of the ANSI A13.1-2007 pipe marking standard and the specifics regarding it.

We dived deeper into the pipe marking standard and have talked about the right color pipe markers you should have for what application. We discussed what size pipe marker you should have, depending on what size diameter pipe you need to mark.  We’ve even talked about the styles of pipe markers out there. Although styles are not regulated in the standard, it’s nice to know the options  you have, from self-adhesive markers, to snap-around pipe markers, to  markers that are  used in extreme conditions or for outdoor use.

To wrap-up the final part of the ANSI A13.1-2007 Scheme for Identification of Piping Systems, we’re going to explore the visibility requirement.  As you can see illustrated below, there  is a specific quantity of pipe markers you must buy. The standard suggests that the pipes shall be marked adjacent to all valves and flanges as well at both sides of the floor or wall penetrations. In addition, pipes shall be marked adjacent to changes in direction and every 25′ to 50′ intervals on straight runs.

ASME/ANSI A13.1-2007 Pipe Marker Placement

So there you have it. In 5 blogs we’ve explored all there is to know about the ASME/ANSI A13.1-2007 Scheme for the Identification of Piping Systems. The previous pipe marker topics we’ve explored have been:

Being Pipe Marker Compliant

Choosing the Right Color Pipe Marker

Choosing the Right Size Pipe Marker

Choosing the Right Type of Pipe Marker

No matter how big or small your project is, Seton has the ability to help you get the pipe marking job done right.

Tweet This Post

In March of this year, The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) proposed $136,000 in fines against a Massachusetts construction contractor for 19 alleged violations of workplace health and safety standards regarding asbestos-containing materials at a local hospital.

To read more about the asbestos related fines and penalties, see the full article here.

One of the most stringent regulations by OSHA regarding Asbestos is the proper labeling methods that should be used. OSHA 1910.1001(j)(4)(i) says that all labels should be affixed to all products and their containers that contain asbestos materials.  Specifically, pipes can be properly marked by using this pipe label.

Prevent personal injury, and properly label and dispose of asbestos materials. Have the right asbestos indication and protection items on hand for a safer work environment.

Tweet This Post

Part of the ANSI Standard A13.1-2007 Scheme for Identification of Piping Systems that recommends a universal approach to pipe and valve identification is a predetermined color scheme.

This secondary piece of pipe identification has been revised in the latest 2007 revision.  This portion of the standard has changed dramatically. In addition, the terminology of inherently hazardous or non hazardous has been removed from the standards. The combination of Yellow/Black is now assigned with flammable fluids, and Green/White shall now identify potable, cooling, boiler feed and other waters. These two changes mean that legends such as hot water, cold water and steam will now all use the color code of Green/White.
The other significant color changes include the addition of Brown/White for combustible fluids and Orange/Black for toxic or corrosive fluids. The fact that the standard has identified specific colors for flammable fluids, combustible fluids and toxic or corrosive fluids means you must consult Material Safety Data Sheets (MSDS) before selecting a color. Further, if the pipe content contains multiple hazards (flammable and toxic) it must be determined which poses the greater risk and marked accordingly. For example, if chilled or heating systems contain toxic treatments the color combination should be Orange/Black. The 2007 standard also identifies for the first time four additional used identified color combinations and specifically identifies all of the exact background colors to be used. The exact colors are safety colors contained in the ANSI Z535.1-2007 standard.

For easy pipe marker color identification of fluids, see the diagram below.

Tweet This Post

The American National Standards Institute (ANSI) Standard A13.1-2007 Scheme for Identification of Piping Systems recommends a universal approach to pipe and valve identification. Seton makes it easy to understand how and why you should label your pipes. One specific recommendation in this standard focuses on what size marker you should use.

The standard makes recommendations as to the size of letter height and length of color field for all pipe markers, based on the pipe diameter. These recommendations are shown in the chart below. Seton markers, when used properly with arrows, meet or exceed the standard recommendation.

ANSI A13.1-2007 Pipe Marker Size Recommendations

Tweet This Post

The ASME (ANSI) Standard A13.1-2007 is a universal approach to pipe identification. It is designed to eliminate confusion of pipe contents. Recommendations in this standard include what size marker to use, what background and font color to use on your markers, and the proper placement of the pipe markers for best visibility.  But did you know that there are varieties of pipe markers available to suit your various application needs? We have detailed three styles below:

Self-Adhesive Markers – These vinyl pipe markers are so easy to install, just peel that back layer off and stick directly onto the pipe. These markers are suitable for indoor or outdoor pipes that are dry and clean.

Snap-Around Markers – These markers save you time on installation since you don’t have to clean the pipes before you “snap” them on. These pipe markers are ideal for dirty, oily, greasy and rough surfaced pipes, indoors or out.

High-Performance Markers – These markers are specially designed to withstand the harsh outdoor environments. These pipe markers resist abrasion, chemicals, high humidity and outdoor weather and are ideal for dirty, oily, greasy and rough surfaced pipes including stainless steel.

No matter what type of pipe marker best suits your needs, Seton offers all of the pipe marker styles listed above and others that easily allow you to comply with the ASME (ANSI) A13.1-2007 Standard.

Tweet This Post

Did you know that there is an international association serving those who use ammonia refrigeration technology?  This association called IIAR, or International Institute for Ammonia Refrigeration,  is recognized throughout the industry and by governments around the world as the authoritative source of information about ammonia refrigeration.

The IIAR has developed a comprehensive ammonia labeling system, much like ASME has for other piping systems. This ammonia specific labeling scheme is outlined in the IIAR Bulletin No.114. This bulletin suggests recommendations on pipe marker label sizes, marker colors, pipe marker installation locations and pipe label material requirements.

There are a variety of ammonia pipe markers available to accommodate your ammonia refrigeration pipe marking needs. Pipe marker options include self-adhesive markers, snap-around marker styles and even  pipe markers that are recommend for harsh environments, indoor or out.

Source: https://www.iiar.org/

Tweet This Post

Did you know that Seton was one of the original members on the committee that established the American National Standards Institute (ANSI) Standard A13.1-1988 Scheme for Identification of Piping Systems? The standard recommends a universal approach to pipe and valve identification, and is designed to eliminate confusion of pipe contents. The standard has since been updated and the most recent version is A13.1-2007. Seton has made it easy to understand how and why you should label your pipes. Recommendations in this standard include what size marker to use, what background and font color to use on your markers, and the proper placement of the pipe markers for best visibility.

Seton has pipe markers to accommodate all environments.

All Seton pipe marking products meet or exceed the standard, making your selection of pipe marking materials easier. Seton offers a large variety of pipe markers, from Snap-Around markers, Self-Adhesive markers, Roll-Form markers and High-Performance marker styles, as well as Medical Gas markers, Ammonia markers, Asbestos markers and Duct markers.  Also, for those occasional hard-to-find markers, Seton offers custom pipe markers, that allow you to create the pipe marker that’s right for your application.

In addition to a large selection of pipe markers, Seton offers additional services. Seton’s Free Take-Off Service, determines the pipe and valve marking requirements for your project.  Seton also offers submittals on most of their markers, making your job easier.

Seton offers same day shipping on stock items, while many custom products ship the next day. Seton also offers a free regulatory information compliance center and a no hassle guarantee.

Visit Seton for all your compliant pipe marking needs.

Tweet This Post

Shop seton.com  for the largest and most comprehensive selection of safety, labeling and signage products and get 20% off orders of $199 or more. 

Choose from a wide assortment of labels, decals, asset tags, pipe markers,  OSHA signage and much more.

Just enter Service No. ES0188 in the service number field during checkout on seton.com.

But hurry, offer expires February 6, 2010.

Tweet This Post

What has almost 1000 pages and is practically bursting at the spine with an incredible selection of products? The 2010 Seton Source Book!

Seton’s Source Book is an annual offering of all of Seton’s products in one handy (and large!) catalog. And, it’s called a “Source Book” for good reason. The 2010 Edition has every pipe marker, asset tag, safety sign and warehouse product that you’ll ever need to address the unique requirments of your business.

From Custom and Specialty Labels to Traffic & Parking Signs, Workzone Safety Equipment to Seals & Locks, the 2010 Source Book is the singular source for all that is safety, labeling and signage products.

We’re sure that once you see the new 2010 Source Book, it’ll never leave your desk. Want a FREE 2010 Source Book for your company? Order one HERE.

Tweet This Post